N Scale Handcar Set Out Kit
(3 pack)
Handcar setoff builds on fill as shown or on flat ground. Used by railroads as a place to clear the line or to turn handcars, motorcars, speeders, etc.
Our kit builds three complete setoffs. Car not included
Part # BL-024
$7.19
Click the photo to order

N Scale Drive-In Kit
Designed to fit against a backdrop or as a stand-alone model. A roadside icon, relive the 50's, 60's and 70's with this kit!
N screen size: 5.00" wide x 3.25" tall. N ticket booth: .50" x .75". Min. size for driveway, marquee, ticket booth and screen: 7.25" wide x 4.75" deep.
Part # BL-068
$18.99
Click the photo to order

N Scale Roadside Tourist Trap Kit
Another laser-cut kit and another roadside icon. This kit includes signs for four different roadside businesses. Sure to be an "attention getter" on your layout or module.
1.75" x 2.75"
Part # BL-070
$22.39
Click the photo to order

N Scale One Car Garage Kit
This is the type of garage that used to sit behind nearly every house and was the standard in the United States until the advent of the attached garage. While this type of garage is not built as often today, many survive and will for many years to come. So whether you model steam, early diesel or contemporary railroading this kit will look just right on your layout.
1 1/2" long x 1" wide
Part # BL-073
$9.59
Click the photo to order

N Scale Wood Loading Ramp Kit
This structure was and still is found at trackside on nearly every railroad in the United States and Canada.  3.00" x .750"
Part # BL-074
$9.59
Click the photo to order

N Scale Section Car and Toolhouse Kit
The section car toolhouse used to be a trackside feature in every railroad town or city in the United States. A few still survive today so, no matter what you model, steam, early diesel or contemporary railroading this kit will look just right on your layout. You'll need one of these in each town on your layout.
1 1/8" long x 1" wide
Part # BL-075
$9.59
Click the photo to order

N Scale Company House Kit
Company houses were found in many coal mining towns, timber camps and other mining towns too. Housing of a standard design was provided to workers by the employers and towns would have several of these housing units.
2.25" x 1.50"
Part # BL-076
$14.39
Click the photo to order

N Scale Wooden Truck Dump Kit
Truck dumps are found in coal mining areas of Appalachia and anywhere coal, stone, or other minerals are delivered by truck to be transported by rail.
2.00" x 1.00"
Part # BL-077
$15.99
Click the photo to order

N Scale Shotgun House Kit
The "row house" of the South and Appalachia, this style of house was also found in many other parts of the USA. This kit that will also make an excellent company house or down-by-the-tracks type house.
.75" x 2.13"
Part # BL-079
$15.19
Click the photo to order

N Scale General Store Kit
Once a fixture in every small town, a few general stores survive in the deepest parts of rural America. False fronts were nearly a "standard" design for general stores and our kit also includes a store room built on the back as was commonly found on these structures.
2.00" x 3.00"
Part # BL-080
$29.59
Click the photo to order

N Scale Ernie’s Gas Station Kit
The once popular cottage type gas station. This kit is based on a real station that stood along US 66 in Carthage, Missouri. Use for the 1920's-1980's. Lots of neat details, signs and a billboard with this kit.
1.75" x 2.75"
Part # BL-081
$27.99
Click the photo to order

N Scale Dari-King Drive-In Kit
Kit features laser-cut exterior and interior walls, doors, window frames, floor, roof and sign frames. Also included are pre-printed windows, roof vents, a great selection of authentic full color walls signs taken from prototype restaurants, and a free standing laser-cut sign for roadside.
Kit dimensions:  2 1/4" x 3".
Part # BL-082
$23.19
Click the photo to order

N Scale Scale House Kit
This structure would also make a great guard shack or storage shed for your industries or a chicken house for your farm scene.
Kit features laser-cut board and batten walls, door, floor, and sub-roof. Includes laser-cut peel-n-stick trim and roofing for easy assembly. Also includes a laser-cut scale for the interior.
Kit dimensions:  1/2" x 1".
Part # BL-084
$9.59
Click the photo to order

N Scale Cash Mine Kit
Cash Mine Works  is an excellent structure to model with interesting and varied roof lines. Many exposed structural frames. And covered loading areas for 2 tracks or use one for rail and the other for truck loading. Great looks of a craftsman style kit, but laser-cutting makes it easy to build.
 Over 230 laser-cut pieces including walls with tab and slot connections, doors, trim, floor, roofing and structural frames. Forty two Grandt Line windows. And signs.
 N kit dimensions .......(4.00" x 4.50" x 5.50" tall)
Part # BL-086
$63.19
Click the photo to order

N Scale Clark Oil Gas Station Kit
A common 1950's-1990's self service style gas station. Clark Oil operated over 1350 stations in the Midwest and Northeastern United States.
1.50" x 2.50"
Part # BL-087
$26.99
Click the photo to order

N Scale Fred & Reds Cafe Kit
Another laser-cut kit and another roadside icon. NEW Cafe structure . Sure to be an "attention getter" on your layout or module.
1.10" x 2.50".
Part # BL-090
$26.39
Click the photo to order

N Scale Tom’s Corn Crib Kit
Another laser-cut kit typical of corn drying cribs accross the US.
1.43" diameter x 1.54" tall
Part # BL-091
$15.99
Click the photo to order

N Scale Backdrop Warehouse Kit
Includes loading docks and five freight doors so you may place this structure on a backdrop at trackside or with truck loading. Lots of interesting roof lines, fancy cornice trim and details separate this kit from all the other backdrop structures. And many details make the roof as interesting as the rest of the structure. This is just an awesome structure loaded with contest winning details and character.
7.00" wide x 1.08" deep x 4.00" tall
Part # BL-092
$66.39
Click the photo to order

N Scale Boston Depot Kit
Small board and batten combination depot includes loading ramp. Based on a Missouri Pacific standard design. This design was also used on other railroads.
3.00" x 1.43"
Part # BL-093
$30.49
Click the photo to order

N Scale Santa Fe 6-room Section House Kit
Santa Fe 6-room Section Houses were provided to station agents, section foremen and their families in remote locations where housing was not readily available.
1.80"x 3.65”
Part # BL-094
$31.99
Click the photo to order

N Scale Gerald Depot Kit
Hip roof with flared eaves really sets this depot apart. Medium combination depot includes loading ramp. Based on a Rock Island standard design. Other railroads used designs very similar to this structure.
1.80" x 3.60".
Part # BL-095
$31.99
Click the photo to order

N Scale Pizza Land Kit
This structure is based on the original Pizzaland building in New Jersey made famous in the opening credits "drive" on the hit show Sopranos on HBO. This kit would be at home in any business district, industrial area or at roadside.
1.25" x 2.18".
Part # BL-096
$23.19
Click the photo to order

N Scale A-to-Z Used Cars Kit
Very common business found all over the USA and in all but the smallest towns. Our used car lot is based on lots from the 1950's but are still common even to this day.
2.10" wide x 1.33" deep (including stairs)
Part # BL-097
$30.39
Click the photo to order

N Scale Joes Cabin Kit
Typical backwoods hunting/fishing cabin made of grooved siding with a lean-to addition on one end. Joe doesn't have indoor plumbing so an outhouse is included.
This kit would also make an excellent company house, sharecroppers house, small farm house, hillbilly shanty, or house on the wrong side of the tracks.
cabin footprint 2.38" x 1.25", outhouse .38" x .38"
Part # BL-1000
$23.99
Click the photo to order

N Scale Sunset Motel Kit
Classic 1950's-70's motel design that could still be in business today. This type of motel could be found on any well traveled highway in big or small towns alike. N scale motel office (including canopy) is 2.62" x 1.80". Each N scale motel unit is 3.50" x1.50".
Automobiles not included
Part # BL-1001
$35.19
Click the photo to order

N Scale Hudson Oil Kit
Based on a 1950's-80's style self service gas station. One of the original self service gas stations Hudson's strategy was to offer self service pumping at a discount over it's other branded competitors. At it's peak Hudson Oil operated in over 35 states.
Automobiles not included. footprint 2.30" x 1.50", canopy 2.56" x 1.70"
Part # BL-1002
$27.99
Click the photo to order

N Scale Sam’s Roadhouse Kit
Found at roadside in rural areas or along the outskirts of town this type of roadhouse is based on juke joints that would have offered drink, food, dancing and maybe even a few groceries or "recreational" gambling in the back room. Sam's is located far enough off the beaten path that an outhouse is provided. Build it without the signs and use it for a house.
Footprint 1.50" x 2.40", outhouse .38" x .38"
Part # BL-1003
$26.39
Click the photo to order

N Scale Walnut Grove Depot Kit
Kit features laser-cut floor, sub-roof, interior and exterior walls with tab and slot connections. Also includes laser-cut peel-n-stick doors, windows, window glazing and roofing for easy assembly. Peel-n-stick trim comes in one piece for each side of the structure and the bay windows making for a fast and precise application of all the detailed trim work. Also includes signs and a chimney.
footprint 1.80" x 3.00"
Part # BL-1004
$31.99
Click the photo to order

Back to Structures

Back to Top