|
|
|
|
N Scale Trains
|
 |
 |
|
|
|
|
Digitrax Zephyr Basic Set
DCS50 Command Station/Booster/Throttle Easy to Use All-In-One Unit, LT1 LocoNet Cable/Decoder Tester, Complete Manuals
Part # ZEP
$154.99
Click the photo to order
|
|
|
|
|
|
|
Digitrax Super Empire Builder Xtra Set
|
|
|
|
|
|
|
Digitrax Super Empire Builder Xtra Set
Radio Equipped
|
|
|
|
|
|
|
Digitrax Super Chief Xtra Set
|
|
|
|
|
|
|
Digitrax Super Chief Xtra Set
Radio Equipped
|
|
|
|
|
|
|
Digitrax DT402 Super Throttle
* Works with ANY LocoNet compatible system
* Full numeric keypad makes loco selection simple
* Run locomotives with “encoder click” knobs for speed and direction control
* Control light and sound effects functions with the press of a button
* Large LCD display shows locomotive status at a glance
* Built in flashlight for convenience
Part # DT402
$147.99
Click the photo to order
|
|
|
|
|
|
|
Digitrax DT402D Radio Equipped Super Throttle
The DT402D Duplex Super Throttle!
- * Works with ANY LocoNet compatible system
- * Full numeric keypad makes loco selection simple
- * Run locomotives with “encoder click” knobs for speed and direction control
- * Control light and sound effects functions with the press of a button
- * Large LCD display shows locomotive status at a glance
- * Built in flashlight for convenience
- Full Featured With Support For:
- * Duplex Radio operation with UR92
- * 29 Functions (F0-F28)
- * Convenient step-by-step throttle option set up
- * Simplified 4 or 2 digit addressing
- *Over 9,000 locomotive decoder addresses
- * 999 turnout decoder addresses
- * 29 Functions (F0-F28)
- * Playable whistle feature on F2
- * Decoder programming
- * Transponding “Find” feature
- * Fast clock display
- * Recall feature
Part # DT402D
$198.99
Click the photo to order
|
|
|
|
|
|
|
Digitrax DT402R Radio Super Throttle
The DT402R Super Throttle!
- * Works with ANY LocoNet compatible system
- * Full numeric keypad makes loco selection simple
- * Run locomotives with “encoder click” knobs for speed and direction control
- * Control light and sound effects functions with the press of a button
- * Large LCD display shows locomotive status at a glance
- * Built in flashlight for convenience
- Full Featured With Support For:
- * Simplex Radio operation with UR91
- * 29 Functions (F0-F28)
- * Convenient step-by-step throttle option set up
- * Simplified 4 or 2 digit addressing
- *Over 9,000 locomotive decoder addresses
- * 999 turnout decoder addresses
- * 29 Functions (F0-F28)
- * Playable whistle feature on F2
- * Decoder programming
- * Transponding “Find” feature
- * Fast clock display
- * Recall feature
Part # DT402R
$187.99
Click the photo to order
|
|
|
|
|
|
|
UT4D Duplex Equipped Utility Throttle
Features:
- Duplex Equipped Radio operation with UR92 Duplex transceiver
- InfraRed operation with UR90, UR91 or UR92
- Works with any LocoNet compatible system
- Supports 2 or 4-Digit Addressing.
- Functions F0-F12 for lighting and sound decoder operation.
- Direction switch with center brake position.
- Large knob for precise throttle control.
- Automatic Selection and Speed matching features.
- UT4 does not handle programming, turnout control, or turnoff layout power.
Part # UT4D
$108.99
Click the photo to order
|
|
|
|
|
|
|
Digitrax UT4R Utility Throttle
Simplex Radio operation
4-Digit Addressing , Low cost , Standard InfraReady , UT4R radio version , Functions F0-F12 for sound decoder operation , Direction switch with center brake position , Improved battery life , Large knob for precise throttle control , Automatic Selection and Speed matching features
Part # UT4R
$97.99
Click the photo to order
|
|
|
|
|
|
|
Digitrax UT4 Utility Throttle
4-Digit Addressing , Low cost , Standard InfraReady , UT4 upgradable to UT4R radio version , Functions F0-F12 for sound decoder operation , Direction switch with center brake position , Improved battery life , Large knob for precise throttle control , Automatic Selection and Speed matching features
Part # UT4
$63.99
Click the photo to order
|
|
|
|
|
|
|
Digitrax UP5 Universal Panel
Give your layout a professionally finished look while simplifying the hook-up, maintenance & troubleshooting of your Loconet layout.
Part # UP5
$15.49
Click the photo to order
|
|
|
|
|
|
|
Digitrax UR90 Infrared Receiver
The UR90 also looks similar to a UP-3 and is mounted in the fascia of the layout. The UR90 is simply an addition to your existing LocoNet so no additional wiring is needed. The UR90 will support approximately 10 DT100IR's or DT300R's. Some layouts will need more than one UR90 because IR is line of sight and the receivers must be able to "see" the IR signal.
Part # UR90
$34.49
Click the photo to order
|
|
|
|
|
|
|
Digitrax UR91 Radio/Infrared Receiver
Simplex Radio operation
The UR91 is the radio/IR receiver unit. The UR91 looks similar to a UP5 and is mounted in the fascia of the layout. The UR91 is simply an addition to your existing LocoNet so no additional wiring is needed. The antennas are concealed under the layout. The UR91 will support approximately 10 radio throttles.
Part # UR91
$112.99
Click the photo to order
|
|
|
|
|
|
|
Digitrax UR92 Radio/Infrared Receiver
Features:
* Simplex Infrared Receiver For Digitrax
Infra-Ready Throttles
* Duplex Radio (UR92), Simplex Radio (UR91)
and/or InfraRed (UR90) Wireless Can Be Used
Simultaneously On Any LocoNet Layout
* Range Is Approximately A 300 ft Diameter Circle
* Supports Up To 20 Digitrax Duplex Throttles
At The Same Time
* Group Name Feature Allows Multiple Clubs To
Run Independently In Close Proximity At Train
Shows and Exhibitions
* Includes PS14 Power Supply
* Operates In The 2.4 GHz Band
* Only One UR92 Is Needed To Run Duplex On
Most Layouts
Part # UR92
$127.99
Click the photo to order
|
|
|
|
|
|
|
Digitrax PR3 USB Programmer/Interface
Digitrax PR3 Link
PR3 Features
- Multifunction USB 2.0 PC connectivity for your railroad (Yay!)
- Digitrax “SoundLoader” compatible. Programs Digitrax sound projects to SFX decoders
- Programs CV’s for most DCC decoders
- LocoNet MS100 mode with Fully Buffered Input and Output data
- Runs on Windows XP, Vista and 2000.
- Runs on Mac OS 10.4/10.5 with JMRI.
- No external power needed for MS100 mode.
- Automatic configuration. No jumpers or switches required. Configurations can be set by software or manually.
- Selectable LocoNet termination. For standalone operation without needing a Command Station.
- LED state indicator lights.
- Small, convenient package
- Firmware updates available from Digitrax Web site.
- Meets FCC Class B requirements.
Part # PR3
$66.99
Click the photo to order
|
|
|
|
|
|
|
PS14 Power Supply
The PS14 is a 300ma, 14 Volt power supply for powering Digitrax accessories like the UP5, BDL168, DS64, SE8C, LNRP, UR90 & UR91 and others
Part # PS14
$10.29
Click the photo to order
|
|
|
|
|
|
|
PS515 Power Supply
Recommended by Digitrax for powering Digitrax Sets & accessories. Works for DC, too!
Class 2 SELV, Input: AC120V 60Hz, Output: 15 VAC, 5 Amps, 75VA
Part # PS515
$37.99
Click the photo to order
|
|
|
