|
|
|
 |
|
|
General Tools
|
|
|
|
|
|
GrassTech Static Grass-Spreader
Our original budget flocking tool has now sold over 2,000 units worldwide, and we mean worldwide - 75% of our sales have been shipped overseas to pretty much every corner of the globe.
We honestly never expected to sell so many of these little tools, from the start we have always made it clear that this design was not our idea and that you can easily build one yourself, despite this - our feedback and sales speaks for itself!
Even after developing our new products, "The GrassTech II", "The Flock-Tech+" - This little tool is still going strong, so we have made a few changes. We have sourced a more powerful electrostatic generator and are using a smaller hopper for the flock/static grass.
Part # GrassTech
$35.99
Click the photo to order
|
|
|
|
|
|
|
GrassTech II Static Grass-Spreader
The GrassTech II has taken the world by storm! This newly developed modelling tool continues to be the biggest selling flock or static grass applicator in the world for over a year. Manufactured in the UK in a professional and quality controlled environment, you can rest assured that the GrassTech II is... Safe, Durable, Powerful, Affordable and Easy & Fun to use!
What's in the box:
1 x GrassTech II Flocking Applicator Tool (New Easy Grip Handle!)
1 x Standard Filter
1 x Hopper Seal/Cap - Keep you flock ready to go.
1 x Instruction Sheet
Part # GrassTechII
$125.99
Click the photo to order
|
|
|
|
|
|
|
Faller 180691 Static Grass-Spreader
Vegetation in next to no time. This device provides the grass fibers with an electrostatic charge so that the fibers stand upright on the meadow surface.
The following steps lead to perfect results
Apply appropriate fixative to the surface to be textured.
Fill the device with the fiber to be applied.
Take a small nail and put it into the wet glue on the surface to disperse the static and attach the clip of tool to it.
Turn the power on, hold it about 10 - 15 inches over the area and shake it slightly.
The fibers are cleanly and vertically applied to the surface.
Part # FAL-180691
$224.79
Click the photo to order
|
|
|
|
|
|
|
Digital Volt Ohm Meter
Digital Multimeter. Has continuity beeper. This DMM tests transistors as well. Handy to have a couple around the office, auto or, home. Range: DCV: 200mV -1000V ACV: 200V -750V Resistance: It starts out at 0-200, 2000, 20K, 200k, 2000k.
Features:
- DCV:200mV-1000V
- ACV:200V-750V
- DCA:200uA-10A
- OHMS:from 0-200 ohm up to 2000k
- hFE: yes
- Diode Test: yes
- Continuity Buzzer: yes
- Power Supply:9V 6F22
- Maximum Display:1999
- Makes a super gift!
- Comes with battery pre-installed!
Part # FHS-Meter
$9.59
Click the photo to order
|
|
|
|
|
|
|
Opti-Visor with 14” focal length
OptiVISOR is a precision binocular headband magnifier which permits unrestricted efficiency while reducing eye strain, leaves both hands free, and allows three dimensional vision. Used by anyone whose profession or craft requires close accurate work. Can be worn over prescription or safety eyeglasses.
Optivisor is equipped with these unique features:
Optical Glass Prismatic Lenses - Ground and polished to precision optical standards - bevel edged and mounted in interchangeable plastic frame.
It Tilts - Adjustable pivots allow the visor to be tilted out of the way when not needed and at your fingertips when you need magnification.
Adjustable Headband - Conforms to fit all head sizes - fabricated from a special blend lightweight material - comfortable when worn for long periods of time.
High Impact Visor - Provides a tough, durable, always new appearance.
Genuine Leather Comfort Band- Padded with orthopedic felt adds to comfort.
Part # DA-3
$39.99
Click the photo to order
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Northwest Short Line Chopper II
Specially die cast and machined for precision
Precision machined and assembled, fine cutting NWSL Chopper design tool made for NWSL by the craftsmen of Taiwan for your further modeling pleasure. Rigidly constructed for precision repeatability—no sloppy, “fits all”, cuts any angle (whether it maintains the angle you want or not) complexity. Use the precision mitre guides to assure accurate angle and repeatability. Retains the high precision, extremely sharp, inexpensive single edge razor blade as the cutting tool to assure economy, clean cuts from a blade you can find when you need it—at most drug, hardware or paint stores—and can afford to replace as often as necessary for clean, sharp cuts every time. Increase your precision and model making efficiency. Fits your workspace—only 7” x 7” Replaceable cutting mat for cleaner cuts Cutting depth of 1/4” maximum Cuts all model building woods, plastics Right-hand or Left-hand operation; Diecast aluminum frame, light (under 2 lb.) and strong Cuts mitres of any angle—precision guides for common angles -30, 45, 60 degrees. Safer, with more accurate repeatability. Rigid handle mount system assures greater accuracy, repeatability of cuts and more safety—no loose handle that can slip or flip into unsafe position exposing cutting blade.Solid Premium all metal base and handle.
NWSL is pleased to support fun railroading by manufacturing and offering the many choices that make it possible for craftsmen to more easily model their railroading dreams. Base: 7.5×7.5×2.5” Weight: 2lb-10 oz, Pkg: Window box
Part # NWSL-694
$35.99
Click the photo to order
|
|
|
|
|
|
|
Rix N Scale Un-Coupling Tools
Un-couple cars with a spin of the tool in your fingers. Works anywhere on the layout .
2 per pack
Part # RIX-628-24
$3.19
Click the photo to order
|
|
|
|
|
|
|
XURON Rail Cutters 2175B
Quite simply the finest track cutter of its kind on the market anywhere, at any price. Its Micro-Shear® cutting action cuts quick, cuts clean, cuts square with a lot less effort than conventional compression cutters. Exclusive Xuro-Rubber™ cushion grips and Light Touch™ return spring for operator comfort and convenience. The track cutter's blades should be positioned on the top and bottom of the rail for the cleanest cut. Rated for Z, N, and HO gauge.
Part # XUR-2175B
$13.19
Click the photo to order
|
|
|
|
|
|
|
Testors Sprue Cutters
The Micro Shear Sprue Cutter is a tough, long lasting instrument designed for cutting and trimming plastic model parts. Precisley-ground cutting faces insure perfectly clean and distinct edges every time. The shears never bend, tear or distort parts Micro Shears can also be used to trim and fit the brass screening material you often need for detailing Hobby Kits.
Part # TEST-50628
$15.39
Click the photo to order
|
|
|
|
|
|
|
X-Acto Extra Hands Double Clip
X-ACTO alligator clamp holds work firmly in any position. Leaves hands free for soldering, gluing, and positioning. Flexible and accurate, great for model-making, crafts, hobbies.
Part # X-75140
$13.59
Click the photo to order
|
|
|
|
|
|
|
X-Acto Needle File Set
X-ACTO needle files are perfect for shaping and smoothing of models, miniatures, and jewelry. Easily files wood, plastic, and metal. Includes quick change wooden handle with one each: round, knife, equaling, square, 3-square, and half round files
Part # X-73610
$17.99
Click the photo to order
|
|
|
|
|
|
|
Excel Deluxe Railroad Tool Set
Deluxe Railroad Hobby Tool Set. Quality tool set for model railroad building and repair. Includes K1 Light Duty Knife, K5 Heavy Duty Knife, Snap Knife, Pliers, Miter box, Pin Vise, 6 inch metal ruler, B490 Saw Blade, Sanding Stick, Swiss Hammer, Phillips Screwdriver, Regular Screwdriver, 2 Assorted Files, 3 Assorted drills, and 3 Assorted blades.
Part # EXL-44289
$62.79
Click the photo to order
|
|
|
|
|
|
|
Excel 6 Piece Screw Driver Set
This set contains 4 flat screwdrivers (sizes 1.4 mm, 2.0 mm, 2.4 mm and
2.9mm) and 2 phillips (#0 and #1.2) with chrome plated swivel headed handles. It comes in a convenient plastic case. The blades are made of rustproof hardened alloy steel.
Part # EXL-55662
$5.19
Click the photo to order
|
|
|
|
|
|
|
Tortoise Drilling Template
This tool is for marking holes to mount Tortoise switch machines with no guessing.
Part # TOR-800-6190
$5.59
Click the photo to order
|
|
|
|
|
|
|
FHS Polishing Films
Package Includes:
5 Sheets of 15 micron grit film (coarse grey)
5 Sheets of 3 micron grit film (fine pink)
5 Sheets of .03 micron grit film (super fine white)
The Grey coarse film can be used to rough polish
followed by the Pink fine film to remove most surface
scratches then follow with the White super fine to
obtain a glass like finish. The flim is adhesive backed
so it can be applied to a glass surface or small block.
A small amount of water can be used on the surface
to flow away debris during polishing.
Part # FHS-2006-1
$3.95
Click the photo to order
|
|
|
|
|
|
|
JMD ExtraTracKit Parallel Spacing tools (2)
This is a GREAT tool for parallel track spacing 1.25” centers.
Good for use with curved or straight gauges. Tools are clear plastic.
Part # JMD-205
$6.49
Click the photo to order
|
|
|
|
|
|
|
JMD ExtraTracKit Parallel Spacing tool (singles)
This is a GREAT tool for parallel track spacing 1.25” centers.
Good for use with curved or straight gauges. Tools are clear plastic.
Part # JMD-210
$3.25
Click the photo to order
|
|
|
|
|
|
|
JMD CURVETRACKIT 11” Radius (1 piece)
This is a GREAT tool for curved track and use with parallel spacing tools for more options in radii , spacing would then be 1.25” centers.
Tools are plastic and interlock with each other.
Part # JMD-206
$7.29
Click the photo to order
|
|
|
|
|
|
|
JMD CURVETRACKIT 15” Radius (1 piece)
This is a GREAT tool for curved track and use with parallel spacing tools for more options in radii , spacing would then be 1.25” centers.
Tools are plastic and interlock with each other.
Part # JMD-207
$7.29
Click the photo to order
|
|
|
|
|
|
|
JMD CURVETRACKIT 19” Radius (1 piece)
This is a GREAT tool for curved track and use with parallel spacing tools for more options in radii , spacing would then be 1.25” centers.
Tools are plastic and interlock with each other.
Part # JMD-208
$7.29
Click the photo to order
|
|
|
|
|
|
|
JMD STRAIGHTRACKIT Straight (1 pieces 14” )
This is a GREAT tool for straight track and use with parallel spacing tools , spacing would then be 1.25” centers.
Tools are plastic and interlock with each other.
Part # JMD-209
$9.69
Click the photo to order
|
|
|
|
|
|
|
A-West Glue aplicator Bottle with 6 Tips
Great for liquid , ACC , Paint , almost ant type of thin liquid for precision application.
Part # Awest-76
$11.19
Click the photo to order
|
|
|
|
|
|
|
Squadron Sanding Stick Coarse
Great for all small hobby sanding tasks.
This is the best stick for general structure and construction needs.
Part # SQU30501
$1.59
Click the photo to order
|
|
|
|
|
|
|
Peco Locomotive Service Cradle for HO ,N ,OO ,HOn3.
The perfect foam holding block for your locomotive work.
Part # PL70
$9.99
Click the photo to order
|
|
|
|
|
|
|
Mascot Precision Drill Bits
Carbon Steel Twist Drill Bits.
Size’s 50 thru 80 Sold EACH
When you go to the checkout you will be allowed to select the sizes and quantities desired.
If any of the selections are higher than the quantity in stock or out of stock , hit the CORRECT CART link above the the items and it will insert the quantity we do have on hand. Numbers not shown are out of stock
Part # MAS-Drill Bits
Price upon selection from $.79 to $1.15 each
Click the photo to order
|
|
|
|
|
|
|
|
|
|
|
ZONA Retractable Razor Knife
Made from durable high impact polycarbonate. Retracting feature allows for one-handed operation. Safer to use and carry. Ideal for art, craft, and model use in the office, home, school and studio.
Set consists of knife with No. 10A blade in handle and 3 additional surgical quality blades: one each of Nos. 10A, 10, 15A. Blades are made from high quality surgical stainless steel and are ultra-sharp, rust proof and long lasting. (Blades are not sterile.)
Part # ZNA-39-800
$5.99
Click the photo to order
|
|
|
|
|
|
|
ZONA Soft Grip Knife
Light duty knife with anti-roll design and "soft grip" handle for extra comfort and control. Rear blade release holds blades securely. Plastic safety cap covers and protects blades. Ideal for cutting wood, paper, plastic film, balsa, vinyl, foamboard and rubber.
Set consists of knife with No. 11 blade in handle and four additional hobby blades: one each of Nos. 10, 11, 16, 33.
Part # ZNA-39-910
$3.99
Click the photo to order
|
|
|
|
|
|
|
ZONA 3 in 1 Saw Set
Versatile set includes three popular interchangeable blades listed below. Blades attach using wing nut and screw.
Part # ZNA-35-100
$6.39
Click the photo to order
|
|
|
|
|
|
|
Woodland Scenics Gentle Grip Tweeser
Long reach , curved ends and protective tips , make these perfect for detail placement
Part # WOO-200
$5.99
Click the photo to order
|
|
|
