|
|
|
 |
|
|
Micro-Mark Tools and Supplies
|
|
|
|
|
|
N Scale Track Inspection Car
Smooth trackwork is essential to reliable model railroad performance. Problems with track can take some of the fun out of train operation and identifying trouble spots can be difficult without the proper equipment. Our Track Inspection Car makes the job easy. The crystal clear floor of the car gives you the best view of the movement of wheelsets through switches and crossings, around curves, and at rail joints. You can quickly detect the location of kinks, bumps, dips and roughness which can hamper the smooth operation of your trains. Trouble spots can be repaired, then re-checked with the car to assure smooth operation and give more operating satisfaction. Assembles easily in a few minutes. Includes trucks, hardware and instructions.
Part # MicM-82120
$11.79
Click the photo to order
|
|
|
|
|
|
|
Magnetic Glueing Jig
Use for dollhouse furniture, miniature picture frames, model railroad structures and rolling stock, ship model deck houses and more. 10-1/4 inch x 10-1/4 inch, 21 gauge steel plate with 7/8 inch flanges bent up at 90 degrees. Includes 8 magnetic holding plates that keep components together squarely while glue dries.
Part # MicM-60304
$23.19
Click the photo to order
|
|
|
|
|
|
|
Magnetic Glueing Jig Extra Magnets
Set of 8 extra magnetic plates designed for use with #60304 and #70223 Magnetic Assembly Jigs.
Part # MicM-60305
$10.49
Click the photo to order
|
|
|
|
|
|
|
Spike and Nail Insertion Plier
Spike Insertion Plier is manufactured with special dies that form perfect T-shaped grooves in the jaw faces. Spikes nestle perfectly into these grooves, and only a gentle squeeze of the handles is needed to hold them securely. The nose is specially contoured to push spikes home without slipping off and damaging the railhead or ties, and the comfortable grips let you spike for hours without fatigue. Your trackwork will be smooth and trouble-free. Works with all brands and gauges of spikes Z through O. Custom-made in the USA to our specifications by Xuron.
Part # MicM-82839
$17.99
Click the photo to order
|
|
|
|
|
|
|
Soldering Station
Economy-priced Variable Temperature Electronic Soldering Station gives you a higher level of performance than you can get with a standard gun or iron, but without the cost of an industrial type soldering tool. Features variable power control from 5 to 40 watts (up to 900 degrees F), allowing one tool to do the work of several. You can solder fine electronic wires or brass rod with the same tool. Includes iron with cushioned foam grip, tip, on/off switch with power-on light, safety guard iron holder and sponge pad for tip cleaning.
Part # MicM-84383
$23.69
Click the photo to order
|
|
|
|
|
|
|
Running Trains DVD
Video Shows You How to Run Your Trains Realistically
You're invited to join veteran modeler Paul Scoles and his crew as they operate his fabulous Pelican Bay & Navigation Company model railroad. In this video, Paul thoroughly explains how to use Micro-Mark train orders, waybills, schedules and a fast clock to reproduce authentic railroad operations in miniature.
Part # MicM-84307
$22.49
Click the photo to order
|
|
|
|
|
|
|
Car Routing System
Realistic operation greatly increases the the overall realism of both your individual models and your model railroad as a whole. With our Car Routing System and our instruction book (included), you'll learn how to use your railroad models in a manner that truly reflects their realism and capabilities. Our Car Routing System is realistic, flexible, and versatile, and requires no special equipment, such as a computer, to set up or maintain. And it's so widely used, many of your visiting operators will be already familiar with it.
#82916 Car Routing System Starter Pack includes: 100 each car cards,waybills, and bad order slips, 25 locomotive cards, 4 three-compartment billboxes, plus basic instructions to get your operations started.
Part # MicM-82916
$25.59
Click the photo to order
|
|
|
|
|
|
|
Car Cards (Yellow)
Buff color, 2-1/8 inches wide x 4 inches high (folded). Designed for use with #82916 Car Routing System. Pad of 100.
Part # MicM-82910
$3.59
Click the photo to order
|
|
|
|
|
|
|
Waybills (White 2 sided)
White color, 2 inches wide x 3 inches high, 4-cycle. Designed for use with #82916 Car Routing System. Pad of 100.
Part # MicM-82911
$3.59
Click the photo to order
|
|
|
|
|
|
|
Locomotive Cards (Grey)
Gray color, 2-1/8 inches wide x 4 inches high (folded). Designed for use with #82916 Car Routing System. Pad of 25.
Part # MicM-82912
$1.79
Click the photo to order
|
|
|
|
|
|
|
Bad Order Slips (Pink)
Pink color, 2 inches wide x 3 inches high. Designed for use with #82916 Car Routing System. Pad of 100.
Part # MicM-82913
$2.69
Click the photo to order
|
|
|
|
|
|
|
Bill Boxes (2 per package)
Bill Boxes attach to your layout fascia to hold car cards (sold separately). Each 3-compartment wooden box measures 8 inches wide x 1-7/8 inches deep x 4-1/4 inches high; compartments are 2-3/8 inches wide. Package of 2. Designed for use with #82916 Car Routing System.
Part # MicM-82914
$9.99
Click the photo to order
|
|
|
|
|
|
|
Field Grass Planting Tool
Special Tool Makes it Easy to 'Plant' Field Grass
Wrap a small bundle of field grass around the forked tip of our special planting tool. Then use the tool to push the grass into your foam scenery base. Pull the tool out, and the grass will remain 'planted.' For plaster scenery bases, drill a little hole before planting. Works fast...works great!
Part # MicM-81751
$4.79
Click the photo to order
|
|
|
|
|
|
|
Distresser Weathering Brush
The 'Distresser' Adds a Realistic, Weatherbeaten Finish to Your Models
When you rub the Distresser's steel bristles across the surface of your model, it abrades the painted surface and makes it look like it's been exposed to the elements for a long time. Distresser's bristle length is adjustable just like the lead in a mechanical pencil...set it short for heavy weathering; long for light weathering. Creates one of the most realistic finishes we've seen on painted wood models.
Part # MicM-82466
$11.89
Click the photo to order
|
|
|
